Elektroapparate AG
Language
13
Decalcification:
After reaching the programmed amount of water, according to the water hardness level, the display
shows ( )
Manual Descaling start by touching (
Descaling symbol (
Water
hardness level
0 = not possible
1 ... 15
16 ... 23
24 ... 30
Setting of water hardness level by touching (
Choice of level by touching corresponding cup (Ristretto or Espresso or Coffee).
Confirm with touching symbol (
Conversion factors:
1 °dH = 1.25 °e
14
Products:
Only 1 Cup products possible
No Steam or Hot water product possible
14.1
Coffee water:
Programmable with Long Press
Amount Coffee: 25 ml ... 240 ml (0.5 oz ... 8.0 oz)
14.2
Coffee flavour, aroma strength:
Possibility to choose the flavour before a draw off by touching the
symbols NORMAL
Place only 1 level measuring spoon of ground coffee into the filler funnel (due to overfilling)
Author: Patrik Studer
Date:
Rev. A:
09.05.2012
19.09.2012
Technical information
EN
) for approximately 2 seconds
°dH
AQUADUR
°dH
5 ... 15
15 ... 20
20 ... 25
).
= 17.86 ppm (CaCO
or STRONG
Flavour
NORMAL
STRONG
Checked:
Rev. B:
Rev. C:
ENA Micro 1
&
) for approximately 2 seconds and then
Liters
(When reached the amount of water)
100
60
40
&
) for approximately 2 seconds.
) = 1.78 °f
3
and during the grinding process (also backwards).
Grinding time grinder Aroma+
Approved:
Docu.-name:
L:\Geräte\ENA_Micro\ENA_Micro_1\Schulungsunterlagen\E\
Technische_Informationen_ENA_Micro_1_EN.doc
Rev. D:
Rev. E:
Technical Support
Message
(No acoustic warning)
2.7 sec.
3.4 sec.
Technische_Informationen_ENA_Micro_1_EN.doc
Rev. F:
Page 7/10