Control Elements; Nd Generation - Jura ENA Micro 1 Series Technical Information

Elektroapparate AG
Language
1

Control elements:

1.1 Service connector, 2
Since the production June 2012, the side panels are assembled concise to the front.
This means, that there is no slot anymore to open the service-cover.
To release the service-cover you can follow up the steps below:
Insert a metal ruler (thickness max. 0.5 mm) on the front side and slide it to the left

(pay attention to not scratch the control panel)
Support this action by pushing with finger from above

Release the left lock analogue the right

Author: Patrik Studer
Date: Rev. A:
09.05.2012 19.09.2012
Technical information
EN
nd
generation:
Checked:
Rev. B: Rev. C:
ENA Micro 1
Approved: Docu.-name:
L:\Geräte\ENA_Micro\ENA_Micro_1\Schulungsunterlagen\E\
Technische_Informationen_ENA_Micro_1_EN.doc
Rev. D: Rev. E:
Technical Support
Technische_Informationen_ENA_Micro_1_EN.doc
Rev. F:
Page 3/10