Table of Contents
Advertisement
Other Printing Problems
Problem
The print on the
If [Toner Saving] is selected on the [Print Quality] tab in the printer driver, the
entire page is fad-
entire page will be faded when printed.
ed.
See the printer driver Help.
Print is smudges.
Settings for thick paper have not been made when printing on thick paper.
• PCL 6/5e and PostScript 3
• RPCS™
When printing
If the printer driver is configured to use the graphics command, the graph-
graphics, the out-
ics command from the machine is used to print.
put and the screen
If you want to print accurately, set the printer driver to print without using
are different.
the graphics command.
See the printer driver Help.
Page layout is not
Print areas differ depending on machine used. Information that fits on a sin-
as expected.
gle page on one machine may not fit on a single page of another machine.
Adjust the [Printable area:] setting in the [Printer Configuration] dialog box on
the [Print Settings] tab in the RPCS™ printer driver.
See the printer driver Help.
Duplex printing is
• Duplex printing cannot be done with paper set in the bypass tray.
malfunctioning.
• Duplex printing cannot be done with thick paper, OHP transparencies,
• Duplex printing cannot be done with a tray for which [1 Sided Copy] has
When using Win-
Make sure the application's paper size and orientation settings match those
dows 95/98/Me,
of the printer driver.
Windows 2000/XP,
If a different paper size and orientation are set, select the same size and ori-
or Windows NT
entation.
4.0, either com-
bined printing or
booklet print does
not come out as ex-
pected.
When using Win-
dows 95/98/Me,
Windows 2000/XP
, or Windows NT
4.0, Auto Re-
duce/Enlarge print
does not come out
as expected.
Causes and Solutions
Select [Thick] in the [Type:] list on the [Paper] tab.
Select [Thick] in the [Paper type:] list on the [Print Settings] tab.
When using duplex printing, make settings to use paper from a tray
other than the bypass tray.
or labels specified as the paper type. Specify another paper type.
been specified as Paper Type on the System Settings menu. Change the
Paper Type setting for the tray to [2 Sided Copy] on the System Settings
menu. See General Settings Guide.
Other Printing Problems
4
31
Advertisement
Table of Contents
