Stuart Turner STUART PH 35 TS Installation, Operation & Maintenance Instructions Manual page 9

3.18 Wiring diagrams:
PH 35 variants
Fig. 4
N
3.19 Fuse: All models should use 5 Amp fuse.
3.20 Supply cord replacement:
3.21 If the supply cord is to be changed or damaged, it must be replaced by a
special cord available from Stuart Turner or one of its approved repairers.
MAIN WINDING
BLUE
THERMOTRIP
START WINDING
L E
230 VAC/1PH/50Hz SUPPLY
The internal wiring within the terminal box is routed and secured
to ensure compliance with the electrical standard EN 60335-1. It
is essential that prior to any disturbance of this internal wiring, all
cable routing and securing details are carefully noted to ensure
re-assembly to the same factory pattern is always maintained.
CAPACITOR
PH 45 variants
Fig. 5
- 9 -
MAIN WINDING
THERMOTRIP
START WINDING
N L E
230 VAC/1PH/50Hz SUPPLY
CAPACITOR