Stuart Turner STUART PH 35 TS Installation, Operation & Maintenance Instructions Manual page 12

5 TECHNICAL SPECIFICATION
Pump Model
General Guarantee
WRAS approval
Approvals
Pump type
Features
Priming vent plug
Typical noise
Materials Pump body
Impeller
Mechanical seal
Maximum head - closed valve
Performance
Performance @ 9 l/min
Performance @ 18 l/min
Maximum flow
Minimum static inlet pressure
Maximum static inlet pressure
Maximum working pressure*
Maximum viscosity
Max. ambient air temperature (continuous)
Max. ambient air temperature (intermittent)
Min / Max water temperature
Maximum suction lift**
Connections Pump connections
Motor Type
Duty rating
Electrical Power supply (Vac/Ph/Hz)
Power consumption - P1
Current - full load
Fuse rating
Power cable length
Physical Enclosure protection
Length
Width
Height - excluding hoses
Weight - including fittings
Stuart Turner reserve the right to amend the specification in line with its policy of
continuous development of its products.
*Note: The maximum pressure that can be applied to the pump under any
**Note: With footvalve fitted.
5.11 Noise: The equivalent continuous A-weighted sound pressure level at a
distance of 1 metre from the pump does not exceed 70 dB(A).
installation conditions.
PH 35 ES PH 35 ES
50 Hz 50 Hz
46563 46451
Approved materials
ü
61 dB(A)
EPDM / PTFE / Viton / Carbon /
Al. Oxide Silicon Carbide
3.0 bar / 30 metres
2.0 bar / 20 metres
1.2 bar / 12 metres
32 l/min
0.05 bar (0.5 metres)
1.4 bar (14 metres)
50 secs redwood no. 1 9.5 centistokes
40 C 40
o
50 C n/a
o
Min 4
Induction, auto-reset thermal trip
Continuous (S1) @ 5 l/min and above
230 V a.c. / 1 / 50 Hz
450 Watts
1.95 Amps
1.5 metres (pre-wired)
241 mm
4.6 Kg
- 12 -
PH 45 ES
50 Hz
46564
2 years
CE
Peripheral
ü ü
64 dB(A)
Brass
Brass
EPDM / PTFE /
Al. Oxide
4.2 bar / 42 metres
3.2 bar / 32 metres
2.3 bar / 23 metres
40 l/min
600 kPa (6 bar)
C 40 C
o o
50 C
o
C / Max 80 C
o o
4.6 metres
G 1 female
665 Watts
2.9 Amps
5 Amps
IP44
257 mm
132 mm
169 mm
6.2 Kg
PH 45 ES
50 Hz
46454
ü
Viton / Carbon /
Silicon Carbide
40 C
o
n/a