Calibration and Troubleshooting
Troubleshooting for Operators
Table B-1 Troubleshooting
Symptom
The power supply is not
operating. FLA FAIL is
displayed.
B-28
Refer to Table B-1 to ensure that the power supply is configured and
connected for normal operation. If you require any further
troubleshooting assistance, call your service technician. See "Contact
Information" on page iii.
Check
Flash memory check sum error.
The power supply will boot with default options and calibration
Important:
values for the 6 V-110 A model.
Further Checks and Corrections
Do a reset. See page 3–39.
M370046-01