Xantrex XTR 850 WATT SERIES Operating Manual page 183

Querying Help for Legacy Command Headers
The [:]SYSTem[<channel>]:HELP:LEgacy? query is
essentially the same as the
[:]SYSTem[<channel>]:HELP[:HEADers]? command, but it
lists legacy Xantrex commands. If executed it returns all Xantrex legacy
commands and queries implemented. The response shall be on a page by
page basis. No single line will be longer than 80 characters and each page
will be 23 lines long. The full path for every command and query shall be
returned separated by line feeds. After a full page of headers has been
displayed you will be prompted to press any key to continue or the ESC
key to stop any further listing of the command headers.
Command:
[:]SYSTem[<channel>]:HELP:LEGacy?
For example:
:SYST2:HELP:LEG?
Might return:
AUX
OUT
ERR?/qonly/
CLR/nquery/
FOLD
DLY
VSET
ISET
TRG/nquery/
OVP
UVP
HELP?/qonly/
HLP?/qonly/
M370046-01
SCPI Error/Event Queue
5-57
5