Equipment Required; Unpacking The Gt100E Ms - Xantrex GT100E Owner's Manual

Installation

Equipment Required

Unpacking the GT100E MS

2–2
• Ratchet Handle
• Extension
• Metric socket set
• Metric wrench set
• Metric hex wrench set
• Torque wrench with 0-150Nm minimum range
• Phillips Screwdriver
WARNING: Equipment is Heavy
combiner box weighs 82 Kg.
The GT100E MS
To unpack the GT100E MS from the shipping pallet:
1. Remove the packing material from the MS100E.
2. Open the GT100E MS Combiner Box.
3. Remove the 8 M6 screws holding the safety cover from the box.
4. Remove the box containing GT100E MS interface assemblies.
5. Remove the manual.
6. Remove the GT100E MS combiner box power cable assembly P/N 1-
152492-01
7. Remove the GT100E MS combiner box interface cable assembly P/N
1-152493-01
8. Remove all mounting hardware from the box.
9. Remove the GT100E MS Combiner Box from the pallet.
152602