Important Safety Instructions - Xantrex GT100E Owner's Manual

Important Safety Instructions

WARNING
This chapter contains important safety and operating instructions. Read and keep
this Owner's Manual for future reference.
1. Before installing and using the GT100E MS Combiner Box for
Master/Slave Configuration, read all instructions and cautionary
markings on the GT100E MS Combiner Box for Master/Slave
Configuration, GT100E Grid Tie Inverter, and all appropriate sections
of this manual.
2. Use only attachments recommended or sold by the manufacturer.
Doing otherwise may result in a risk of fire, electric shock, or injury
to persons.
3. To avoid a risk of fire and electric shock, make sure that existing
wiring is in good condition and that wire is not undersized. Do not
operate the GT100E MS Combiner Box for Master/Slave
Configuration with damaged or substandard wiring.
4. Do not operate the GT100E MS Combiner Box for Master/Slave
Configuration if it has received a sharp blow, been dropped, or
otherwise damaged in any way. If the GT100E MS Combiner Box for
Master/Slave Configuration is damaged, see the Warranty section.
5. Do not disassemble the GT100E MS Combiner Box for Master/Slave
Configuration. It contains no user-serviceable parts. See Warranty for
instructions on obtaining service. Attempting to service the GT100E
MS Combiner Box for Master/Slave Configuration yourself may
result in a risk of electrical shock or fire. Internal capacitors remain
charged after all power is disconnected.
6. To reduce the risk of electrical shock, disconnect both AC and DC
power from the GT100E Grid Tie Inverter and the GT100E MS
Combiner Box before attempting any maintenance or cleaning or
working on any circuits connected to the GT100E MS Combiner Box
for Master/Slave Configuration. Turning off controls will not reduce
this risk.
v