Putting the System into Safe Mode
975-0125-02-01
When you are installing or removing devices from the Xanbus system, putting the
system into Safe mode prevents unexpected behavior.
To enter Safe mode:
1. On the Select Device menu, use the down arrow button to highlight System.
The cursor on the right of the screen indicates where you are in the menu.
Figure 2-5 Select Device Menu
2. Press Enter.
The System Settings menu appears.
Figure 2-6 System Settings Menu
3. On the System Settings menu, with Desired Mode highlighted, press Enter.
4. Use the down arrow button to scroll through the other modes to select Safe
mode.
For more information on the different system modes: Operate, Power Save,
and Hibernate see "System Modes" on page 2–6.
Operation
2–9