Table of Contents
Advertisement
Monitoring the Inverter
Additional Offline
messages for
multiple unit
systems
Fault Mode
5–6
These message screens are common to all GT Inverter systems, no matter how
many units are installed. If you continue to tap the unit, then the LCD will
continue to cycle through all of the available offline mode screens.
Table 5-6 Offline Mode Screens for All GT Inverter Units
Tap
Display*
1st time
2nd time
3rd time
4th time
* In a multiple unit system with communications cables properly installed, the
system values displayed are for the entire system. Time online is for the local
inverter.
Multiple unit systems in offline mode display all of the message screens shown in
Table 5-6, plus the additional screens shown in Table 5-7. These additional
screens are displayed following the "Time Online" screen.
These screens are only displayed on multiple unit GT Inverter systems with
communications cabling properly installed. If you continue to tap the unit, then
the LCD continues to cycle through all of the available offline mode screens.
Table 5-7 Additional Offline Mode Screens for Each GT Inverter Unit in a
Multiple Unit System
Tap
Display
5th time
6th time
When a fault state is detected, the appropriate fault message appears on the front
panel display at the next screen refresh (i.e., within 2 seconds). The GT Inverter
fault message screens are shown in Table 5-8.
Description
LCD back light turns on for better readability
and default Offline Mode screen is displayed.
Power being produced by the system now.
Cumulative energy produced by the system
today.
Lifetime energy produced by the system.
Total time that the system was online today, in
hours (hh), minutes (mm) and seconds (ss).
Description
Power being produced by this unit now.
Cumulative energy produced by this unit today.
Lifetime energy produced by this unit.
975-0131-01-01
Hide quick links:
Advertisement
Table of Contents
