UNITED OFFICE ULGD 350 A1 Operating Instructions Manual page 9

Handling and operation
In this chapter you will receive important information about the handling and
operation of the appliance.
Suitable laminating pouches
For hot lamination you can use pouches with a width of up to 230 mm and a
maximum thickness of 125 micron. For cold lamination you can use pouches with
a maximum thickness of 200 microns. Please note that each laminating pouch
may only be used once.
NOTICE
► For hot lamination, use only laminating pouches that are expressly
intended for hot lamination.
► For cold lamination, use only laminating pouches that are expressly
intended for cold lamination.
► Take note that the laminating pouches supplied with the laminator are
intended exclusively for hot lamination.
Switching levels
Selector switch
position
NOTICE
► For high-gloss photos, you should select the switch position "125" as well
as the appropriate pouch thickness.
ULGD 350 A1
Pouch thickness
switch position
5
Hot
Hot
Cold
Laminating pouch
4
80
125
125
thickness
> 60 - 80
85 - 125
to 200
7
GB
IE