Worth Data RF Terminal 7000 Owner's Manual page 58

SendFormat (15-line terminal only)
Parameters: FGcolor, BGcolor
Function:
SendDate
Parameters: line
Function:
Beep
Parameters: count
Function:
PlayVoice
Parameters: msgnum
Function:
ReInit
Function:
ReInitAll
Function:
GetErrCode
Returns code for the most recent error. Calling this method resets the Error Code to 0.
Error Codes
0. No Error
1. Command Data Too Long
2. Error on Close Device
3. Serial Out Data Too Long
4. Invalid Terminal ID On Last Command
5. Terminal ID Format Error
6. Display Formatting Error
Events – ActiveX Object
WDterm events occur when a specific condition is met. When an event is "fired", an event handler function
in your application is called.
Though the details of exactly how it is done varies from one programming environment to the next, the
source code skeletons for the various event handlers are automatically generated and inserted into your
source code for you. See the samples for more specific information.
Each event passes relevant information to your event handler function. The only event that does not pass
any data is
OnTermBaseRegister
also passes the data that was keyed or scanned into the terminal.
OnTermData
Sends to the
ActiveTerminal
to the DefineFormat method. It also sets the user-default display foreground and
background colors.
Must be followed by an
This instructs the
ActiveTerminal
Must be followed by an "
This instructs the
ActiveTerminal
Must be followed by an "
This instructs the
ActiveTerminal
be a value from 1 to 99. Must be followed by an "
This instructs the
ActiveTerminal
call to take effect.
Base Stations use the message "Buffer Reinitialized..." to indicate a single terminal
re-initialization.
Instructs all attached terminals to re-initialize.
. All others pass at least the Terminal ID on which the event occurred.
the current Format Definition as created by one or more calls
method call to take effect.
Input
to display date and time on the specified line number.
" method call to take effect.
Input
to beep count times. Count may be a value from 1 to 9.
" method call to take effect.
Input
to play voice message number msgnum. Msgnum may
to re-initialize. Must be followed by an "
" method call to take effect.
Input
" method
Input