Worth Data RF Terminal 7000 Owner's Manual page 54

• Methods are function calls used to issue commands and access features of the drop-in component. An
example of a method is sending an
• Events are function definitions placed in your application's source code. The function definitions in your
source code are called Event Handlers. The skeleton structure of the event handler's source code is
automatically generated. The code in the Event Handler is called ("fired") by the drop-in component when a
specific event occurs. An example of an event is when a terminal returns data and the
fired.
The details of how to access Properties/Methods/Events varies between development platforms. Details of
how it works in some of the most popular platforms is illustrated in the samples included with the RF
Utilities CD or available for download from our website at:
Properties – ActiveX Object
Properties are the various configuration variables used by the WDterm control. They are directly assignable
in your application (e.g. "
object browser.
Important: Except for
can be changed. Use the
serial port.
Note that your development environment may show more properties for the WDterm control than are listed
here. This is normal. You may ignore properties you see that are not listed here.
ActiveTerminal
Valid values: 0 -63
Definition: This is the terminal ID (0-63) to which method call instructions are directed.
ComDeviceName
Valid values:COM1-COM16
Definition: This is the serial port that this instance of the control will use. If you have more than
ComBaudValue
Valid values:300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Definition: This is the serial port speed setting and must match the base station setting.
ComParity
Valid values:None, Even, Odd.
Definition: This is a serial port setting and must match the base station setting. WDterm may allow
ComDataBits
Valid values: 7, 8
Definition: This is a serial port setting and must match the base station setting. WDterm may allow
command to the terminal.
Input
http://www.barcodehq.com/downloads.html
WDterm.ActiveTerminal = 5
and
ActiveTerminal Quiet
method before setting properties and then call
CloseDevice
one base station, drop in another WDterm control and set its
other COM port(s).
other settings but those listed here are the only ones compatible with current version
base stations.
other settings but those listed here are the only ones compatible with current version
base stations.
") and can be set in your development environment's
, all properties require the serial port to be "closed" before they
event is
OnTermData
to re-open the
OpenDevice
for your
ComDeviceName