Advertisement
Quick Links
7100 RF Terminal
7100 & 7200 Series R Terminal System
QuickStart and Installation uide
FCC ID:
JWSLT7001
CANADA:
4724A-LT7001
MODELS EQUIPPED WITH LUETOOTH® TECHNOLOGY: CONTAIN FCC I.D. PI4411B
Warning: This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance with the instruction
manual, it may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing
device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the
user, at his own expense, will be required to take whatever measures may be required to correct the interference.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
CLASS II LASER
For Software Tools, Hardware Drivers & Manuals Please Visit:
https://www.barcodehq.com/downloads.html
©
Copyright
2004- 2021 Worth Data Inc., All rights reserved
Revised May 2021
No part of the contents of this manual may be reproduced or transmitted in
any form or by any means without the written permission of Worth Data
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Worth Data 7100 Series
Summary of Contents for Worth Data 7100 Series
- Page 1 © Copyright 2004- 2021 Worth Data Inc., All rights reserved Revised May 2021 No part of the contents of this manual may be reproduced or transmitted in any form or by any means without the written permission of Worth Data...
- Page 2 3. A Base and a Relay are the same product. A jumper change is all that is required to use a Base station as a Relay. See Appendix A in the Components The components in your 7100 or 7200 RF Terminal system will vary Users Manual for details.
Need help?
Do you have a question about the 7100 Series and is the answer not in the manual?
Questions and answers