Rf Configuration - Worth Data RF Terminal 7000 Owner's Manual

SPEAKER SETTINGS
LASER SETTINGS
LCD SETTINGS
OTHER SETTINGS
SYSTEM TOOLS
DONE/EXIT
Select the option you want to set or verify or press 0 or the F1 key to exit back to the MODE MENU.
The groups in the keypad Setup Menu contain the following setup parameters:
Setup Group
RF Setup
1
Bar Codes
2
RS-232
3
Date/Time
4
Once you have selected a group to edit, you will see each parameter displayed in the order listed above. Use
the next section of this chapter as a reference for all RF Terminal Setup Parameters.

RF Configuration

Default settings are shown in bold type.
The RF Terminal will typically require no setup changes except, Terminal ID (if more than one terminal) and enabling
bar codes to be read other than UPC or Code 39.
RF Terminal ID
Default ID
Available IDs
Every terminal needs a unique Terminal ID. The default Terminal ID is always shipped as 0. If you
•
have more than one RF Terminal assigned to a Base Station, you must be sure that each RF Terminal has
a unique Terminal ID, (otherwise you will have big troubles including false error messages). The
Terminal ID is always displayed on the Start Up screen when you power up the terminal. There are 64
Terminal IDs available - 0-9, A-Z, a-z, and the special characters "-" and "=". To change the Terminal
5
6
7
8
9
0
Parameter
RF Channel
Terminal ID
Security Code
Skip opening screens
Control Keys Only
Auto Check Back
Code 3 of 9
UPC-A, EAN 13
UPC-E, EAN 8
Code 128
2 of 5 Codes
Codabar
MSI/ Plessey
Code 93 / Code 11
Databar / RSS / Other
Baud Rate
Parity
Data Bits
XON/XOFF Printer
Set Time
Set Date
Date Format
Year Output
Shut Down Time
0
0-9, A-Z,
a-z, - =
Setup Group Parameter
Speaker Beep Volume
5 Beep Tone
Voice Volume
Keypad Tone
Laser Double Decode
6 4.5 Second Laserbeam
Aiming Dot Duration
LCD 4 Line Legacy Mode
7 6 Line Legacy Mode
Background Color
Text Color
Brightness
Brightness Timeout
Other Preamble
8 Postamble
Characters
Control Keys