Date & Time Setting; Speaker Settings - Worth Data RF Terminal 7000 Owner's Manual

Date & Time Setting
Set Time
The time is set using a 4-digit military hhmm format. For example, to set the time to 3:08 p.m., you would enter
1508. To display the time during operation, press the STATUS key.
Set Date
For correct date display, the 6-digit date must be set in the date format you plan to use. By default the US
terminals use the US date format of dd/mm/yy. If you change the date format, you must re-set the date to
match the new format. For example, to set a date of January 20, 2009, you would enter 012009 (US format)
or 200109 (European format). To display the date during operation, press the STATUS key.
Date Format
US Format
European Format
• The US format of mm/dd/yy is the default setting.
•
If you switch formats, you must reset the date (SET DATE) in the new format also.
Year Output
2 digit
4 digit
• By default, the RF Terminal is configured to display and transmit the year in a 2-digit format; i.e. 2009
would transmit and display as 09.
• Before you change the RF Terminal to display a 4-digit year, i.e. 2009, make sure that the software receiving
data from the RF Terminal is set up to accept a 4-digit year.
Shut Down Time
By default, if the RF Terminal is inactive (no keystrokes or scanning) for more than 5 minutes, it will
shut itself down in order to conserve batteries. This includes SIGNING OFF if appropriate. To resume
operation, you must turn the RF Terminal back on using the ON/OFF key. To change the amount of time
the RF Terminal waits before shutting down enter two digits - the default is 05 (5 minutes)- to
correspond to the length of time in minutes. For example, 01 would be 1 minute. Setting the Shut Down
Time to 00 will disable automatic shutdown.

Speaker Settings

Speaker Options
Beep Volume
OFF
Low
Medium
High
The default volume of the "Beep" is Medium. Each time you press the
beep at the different volume settings. When you are happy with the loudness of the beep tone, press 0
0
1
0
1
1
1
1
1
"1" key you will hear a