3.2.2
Debug Port Settings
ROM-5620 can communicate with a host server by using serial cables. Common
serial communication programs such as HyperTerminal, Tera Term or PuTTY can be
used in this case. The example below describes the serial terminal setup using
HyperTerminal on a Windows host:
1.
Connect ROM-5620 with your PC by using a serial cable.
2.
Open HyperTerminal on your Windows PC, and select the settings as shown in
below Photo.
3.
Insert power adapter to DC jack and power up the board. The Debug console
log will be displayed on the terminal screen.
ROM-5620 User Manual
18