Flowserve LTQ008 Series User Instructions page 48

LTQ008 – LTQ230 Series Single-Phase Products User Instructions – AIIOM000164
EN
Flowserve factory contacts: FLOWSERVE REGIONAL SALES OFFICES:
United States
Flowserve Corporation
5114 Woodall Road
Lynchburg, VA 24502-2248
Phone: 1 434 528 4400
Fax: 1 434 845 9736
United States
Flowserve Corporation
14219 Westfair West Drive
Houston, TX 77041-1137
Phone: 1 281 671 9209
Fax: 1 281 671 9268
Email: vachouston@flowserve.com
Local Flowserve representative:
To find your local Flowserve representative use the Sales Support Locator
System found at www.flowserve.com.
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When
properly selected, this Flowserve product is designed to perform its intended function safely during its useful life.
However, the purchaser or user of Flowserve products should be aware that Flowserve product might be used
in numerous application under a wide variety of industrial service conditions. Although Flowserve can (and
often does) provide general guidelines, it cannot provide specific data and warnings for all possible
applications. The purchaser/user should read and understand the User Instructions: Installation Operation
Maintenance included with the product, and train its employees and contractors in the safe use of Flowserve
products in connection with its application
While the information and specifications contained in this literature are believed to be accurate, they are
supplied for informative purpose only and should not be considered certified or as a guaranteed of satisfactory
results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express
or implied, regarding any matter with respect to the product. Because Flowserve is continually improving and
upgrading its product design, the specifications, dimensions and information contained herein are subject to
change without notice. Should any question arise concerning these provisions, the purchaser/user should
contact Flowserve Corporation at any one of its worldwide operations or offices.
© 2017 Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation