PCAN-PC/104-Plus – User Manual
3.3
Cabling
3.3.1
Termination
A High-speed CAN bus (ISO 11898-2) must be terminated with 120
ohms at both ends. The termination prevents interfering signal
reflections and ensures the proper operation of the transceivers of
the connected CAN nodes (CAN interfaces, control devices).
The PCAN-PC/104-Plus card does not have an internal termination.
Use the card on a terminated CAN bus.
3.3.2
Example of a Connection
This example shows a connection between the PCAN-PC/104-Plus
card and a control unit. The connection cable is terminated with 120
ohms at both ends.
Figure 8: Simple CAN connection
18