Function Control; General - probst TAK Series Operating Instructions Manual

Safety
1.7

Function Control

1.7.1

General

●
Before using the device check the functions and the working condition.
●
Maintenance and lubrication are only permitted when device is shut down!
●
Do not use the device, until all faults which can cause safety hazards are removed.
●
If there are any cracks, splits or damaged parts on any parts of the device, immediately stop using it.
●
The operating instructions must be available at the workplace every time.
●
Do not remove the type plate of the machine.
●
Unrecognisable information signs (such as regulatory or prohibition signs) must be replaced.
5100.0018; 5100.0013 V4
5 / 25
GB