Auto Mode; Indicator Lights; Jammed Floor Head Brush - anko EV-696-S222 Manual

6.2.3

Auto Mode

Whilst the vacuum cleaner is running, press the "Auto" button on the control
panel once. The vacuum cleaner will change to minimum power mode and the
Light Ring will illuminate at the start of the light ring, as well as the Auto Button
will illuminate.
During use, depending on the floor surface and the amount of dust the vacuum
cleaner is picking up, the vacuum cleaner suction will automatically adjust to
the required power.
Press the same button again and it will change back to default power mode.
Or, squeeze the button on the handle in again to turn Off.
7

Indicator Lights

7.1

Jammed Floor Head Brush

The vacuum cleaner is fitted with a sensor which detects if the floor head rotary
brush gets jammed.
If the brush gets jammed, the vacuum cleaner will turn off and a Red indicator
light will blink on and off.
Refer to the "Cleaning the Motorised Floor Head" section in this manual on
how to clear a floor head jam.
Page 13 of 24