Insertion And Removal Of Battery; Charging - anko EV-696-S222 Manual

5.7

Insertion and removal of Battery

Note: Charge the Vacuum Cleaner for at least 5 hours prior to use.
Only use the Battery Charger which was supplied with this appliance.
Insert the battery into the back of the vacuum Cleaner body and push all the
way in until it locks in place.
Note: The Battery can only be inserted in one direction as shown
To Remove the battery, press the release button located inside of the handle
area, and at the same time, pull the battery straight out.
5.8

Charging

The Charging Dock / Storage Bracket can be attached to the wall with the
supplied wall plugs and screws.
Refer to the section "Storage" for instruction on mounting the Charging Dock
/ Storage Bracket to the wall.
With the battery inserted into the vacuum cleaner, slide the vacuum cleaner
into the charging dock.
Page 10 of 24