Related Manuals for anko VC8273-L-9
Summary of Contents for anko VC8273-L-9
- Page 1 Vacuum Cleaner User Manual Model no.: VC8273-L-9 PLEASE READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
-
Page 2: Important Safetyguards
IMPORTANT SAFETYGUARDS FOR HOUSEHOLD USE ONLY. This appliance should only be used for domestic cleaning, and must only be used indoors, as described in this user guide. 1. Always switch off and remove the charger from the socket before cleaning the appliance or any maintenance task. - Page 3 End of Product Life Battery Disposal If the cleaner is to be disposed of, the batteries should be removed. The battery is to be disposed safely. Used batteries should be taken to a recycling station and not disposed of with household waste.
-
Page 4: Charging The Vacuum
PARTS Wall mount pack Charger Handheld Vacuum Flip-up crevice tool Brush Rubber wiper On/Off switch Charging/ Power indicator Dust cup release button Dust cup Cloth filter CHARGING THE VACUUM Plug the charger into the wall outlet, ensure the voltage of the electricity supply is same as that indicated on the rating label of battery charger. - Page 5 ASSEMBLY IMPORTANT! For Dry and Wet vacuum, the cloth filter must always be used when operating the handheld vacuum cleaner. A crevice tool is built into the nozzle and can be flipped-down for dry vacuum use. Fold the crevice tool and attach the rubber wiper provided for wet suction.
-
Page 6: Using The Vacuum
USING THE VACUUM Turn on the vacuum cleaner by sliding the On/Off switch forward. (i.e. “O” = OFF, “I” = ON). To stop, slide the switch back. Return the product to the charging base after each use. MAINTENANCE Empty the dust cup Press the dust cup release button and pull out the dust cup Pull out the filter. - Page 7 Empty the dust cup. Cleaning the filter Wash the filter and dust cup under rinsing water. Leave to dry for 24 hours. Make sure filter and dust bin are dried thoroughly before fitting them back to the unit. IMPORTART! Filters must be cleaned regularly for best suction performance and to prevent over-heating and damaging the...
- Page 8 STORAGE Wall Mount There is a wall mount accessory supplied with screws and wall plugs. To install the wall mount bracket, position it on the wall at a suitable height. Mark the two screw holes through onto the wall. Using a suitable drill (wood drill bit for timber wall, or masonry drill bit for brick / concrete walls, drill three holes...
-
Page 9: Troubleshooting
TROUBLESHOOTING Problem Possible causes Solutions The vacuum cleaner does not 1. The power switch on unit is 1. Slide the power switch switch on OFF. forward. 2. Bad contact to mains power 2. Check connection and see socket/ charger jack if battery is fully charged Suction not strong 1. - Page 10 12 MONTH WARRANTY Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided.