Assembly Method; Assembling The Extension Tube; Removing The Extension Tube; Attaching The Motorised Floor Head - anko EV-696-S222 Manual

5

Assembly Method

Please Note: Always remove the Battery Charger from the power socket
before assembly.
5.1

Assembling the Extension Tube

Insert the top end of the Extension Tube into the mating hole in the vacuum
cleaner body ensuring the locking tabs are aligned, then push inward until it
locks into place.
5.2

Removing the Extension Tube

To remove the Extension Tube, press the two locking buttons in to release
then pull the tube straight out.
5.3

Attaching the Motorised Floor Head

To attach the motorised floor head to the other end of the extension tube,
insert the end of the Extension Tube into the end of the Floor Head, ensuring
the locking tabs are aligned, then push inward until it locks into place.
Page 7 of 24