Using The Vacuum Cleaner; On / Off - anko EV-696-S222 Manual

Plug the Power Adaptor into the power point and switch on.
During Charging, the indicator light bars on the handle will illuminate in order
of charge state and will blink indicating the battery is charging.
The digital readout will also display the percentage of charge.
The digital readout will show 100% when fully charged.
When the battery is fully charged, switch off and unplug the battery charger
from the power supply.
When fully charged, the Vacuum Cleaner is ready for use.
IMPORTANT:
NEVER BLOCK ANY VENTS OR OPENINGS, OR COVER THE UNIT WHILE
CHARGING.
6

Using the Vacuum Cleaner

6.1

On / Off

To use the Vacuum Cleaner, assemble the unit as previously instructed and
ensure the battery is fully charged.
To switch on, grasp the handle and squeeze the button on the handle in. The
vacuum cleaner will start in the default power mode.
Page 11 of 24