Outgoing Line Priority; To Set An Outgoing Line Priority - BT Versatility Manual

BT Versatility
Owner's Manual
• From the Programming Extension, press the PROGRAMME Key
• Press the Scroll Down Key ( ) until 'System programming' is displayed.
• Select 'System programming'.
• Enter the System Programming Password and select 'Lines'.
• Press the Scroll Down Key ( ) until 'Outgoing groups' is displayed.
• Select 'Outgoing groups'.
Select the Group you wish to set up. Up to eleven Groups can be set up, each with a
•
corresponding access code – 9, 760 - 769
Select the lines to be in the Group. The lines in the Group are indicated by a ♦.
•
Press the Hands-free Key to finish programming.
Note: Lines can be in one Outgoing Group only. Selecting a Line to be a member of a Group
automatically removes it from all other Groups.
Note: To program Outgoing Groups when a PRI interface Access is installed see page 109

Outgoing Line Priority

If the system has a mixture of ISDN and PSTN lines this feature allows the user to set the type of
line an outgoing call will attempt to seize first, i.e. if set to PSTN then outgoing calls will go out
on a PSTN line if available, if not available it will go out on an ISDN line. By default, No Priority is
set.

To set an Outgoing Line Priority

• From the Programming Extension, press the PROGRAMME Key
• Press the Scroll Down Key ( ) until 'System programming' is displayed.
• Select 'System programming'.
• Enter the System Programming Password and select 'Lines'.
• Press the Scroll Down Key ( ) until 'Outgoing Line Priority' is displayed.
• Select 'Outgoing Line Priority'.
• Select the required option. 'ISDN Priority', 'PSTN Priority' or 'No Priority'
Press the Hands-free Key to finish programming.
57