Selection of External Device
Select the External Device to be connected to the Display.
Use System Area
GP-Pro EX Device/PLC Connection Manual
Select the maker of the External Device to be connected. Select "Sharp MS Corporation".
Select a model (series) of the External Device to be connected and connection method.
Select "JW Series Computer Link SIO".
Check the External Device which can be connected in "JW Series Computer Link SIO" in
"1 System Configuration" (page 3)
Check this option when you synchronize the system data area of the Display and the device
(memory) of the External Device. When synchronized, you can use the ladder program of
the External Device to switch the display or display the window on the Display.
GP-Pro EXReference Manual "Appendix 1.4 LS Area (only for direct
This can be also set with GP-Pro EX or in off-line mode of the Display.
GP-Pro EX Reference Manual "5.14.6[ Setting Guide of [System Setting
Window], Setting Guide of [Main Unit Settings], System Area Setting"
Maintenance/Troubleshooting "2.14.1 Settings common to all Display
System Area Settings"
Select the Display port to be connected to the External Device.
JW Series Computer Link SIO Driver