Settings In Off-Line Mode - Sharp JW Series Connection Manual

4.2

Settings in Off-Line Mode

• Please refer to Maintenance/Troubleshooting for more information on how to enter off-line mode
or about operation.
Cf.
Communication Settings
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings] in the off-line
mode. Touch the External Device you want to set from the displayed list.
Setup Items
SIO Type
Speed
Data Length
Parity
Stop Bit
Flow Control
GP-Pro EX Device/PLC Connection Manual
Maintenance/Troubleshooting "2.2 Offline Mode"
Select the SIO type to communicate with the External Device.
To make the communication settings correctly, confirm the serial interface specifications of
Display unit for [SIO Type].
We cannot guarantee the operation if a communication type that the serial interface does
not support is specified.
For details concerning the serial interface specifications, refer to the manual for Display
unit.
Select speed between the External Device and the Display.
Select data length.
Select how to check parity.
Select stop bit length.
Select the communication control method to prevent overflow of transmission and
reception data.
JW Series Computer Link SIO Driver
Setup Description
47