Sharp JW Series Connection Manual page 46

Setup Items
Retry
Wait To Send
RI/VCC
Device Setting
To display the setting screen, click
Settings ] of [Device/PLC Settings ].
When connecting multiple External Devices, you can click
Settings] to add the External Device which is available to set.
Setup Items
Series
Station No. (Oct)
GP-Pro EX Device/PLC Connection Manual
In case of no response from the External Device, use an integer from 0 to 255 to enter how
many times the Display retransmits the command.
Use an integer from "0 to 255" to enter standby time (ms) for the Display from receiving
packets to transmitting next commands.
Switches RI/VCC of the 9th pin.
It is necessary to change RI/5V by changeover switch of IPC when connect with IPC.
Please refer to the manual of the IPC for more detail.
([Setting]) of the External Device you want to set from [Device-Specific
Select a series of the External Device
Enter the unit No. of the External Device with "01 to 77" (octal).
• When connecting the JW10 Series, enter with "0 to 77" (octal).
JW Series Computer Link SIO Driver
Setup Description
from [Device-Specific Settings] of [Device/PLC
Setup Description
46