Harmar Mobility AL215 Axis I Installation & Owner's Manual page 6

OWNER
OPERATING YOUR LIFT
When the lift is not being used, press the UP
button to run the strap up and keep the hook from
swinging. [Figures 4-1 thru 4-3]
Tighten the strap only enough to
prohibit the lift from rotating.
Over-tightening may cause
CAUTION!
damage to the strap and/or lift.
NOTE: The AL215 is manually rotated and does
not have a lock to keep it from rotating. In order
to prevent it from moving when not in use, we
recommend that the strap be run down by holding
the DOWN button until the hook has reached the
gusset nearest the side wall of the vehicle. Latch
the hook on the gusset and press the UP button
until the strap is taut, as shown for passenger side
applications. [Figure 4-4]
Always hook the strap to the
gusset and run taut when
CAUTION!
AL215 is not in use.
4
| www.harmar.com | 800-833-0478
Figure 4-1
Figure 4-2
Figure 4-3
Figure 4-4
© 2016 Harmar All Rights Reserved