Installing The Antenna (Vehicle) - Wilson Electronics SignalBoost Installation Manual

900/1900 mhz iden
Table of Contents

Advertisement

installing the antenna
To receive the best cell signal, select a location in the center of the vehicle's roof at least 12
inches away from any other antennas and free of obstructions.
Carefully
Pull Down
Door Seal
Run Cable
Under
Seal
tuck Cable
Under Seal
Vehicle Installation
The antenna must be installed vertically.
Signal performance will be degraded if the
antenna is not vertical.
The antenna cable may be run through the
door to the amplifier.
!
Warning: The mobile antenna used
with this amplifier must have a separation
distance of at least 8 inches from all persons.
For a more professional-looking installation,
the antenna cable may be run under the
door seal. Carefully pull down the door
seal. Run the cable through the seal
and push the seal back into place. This
prevents constant wear and tear on the
cable as the door opens and closes.
The antenna cable is small enough to easily
tuck under the door seal or plastic molding.


Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SignalBoost and is the answer not in the manual?

Questions and answers

Table of Contents