Sd Memory Card - WAREMA WMS WebControl Manual

System

8.1 SD memory card

34
We reserve the right to make technical changes
The menu bar of the WMS WebControl contains another large menu item.
Click the "System" button to obtain information about the status of your sys-
tem.
Fig. 29 Status information under the "System" menu item.
Using a standard SD memory card, you can perform the following tasks in
this menu:
 Load the projects created with the WAREMA WMS studio software using the
"Load" button,
 Store the projects you created as a backup on the SD memory card using
the "Store" button.
Only one project file, which always has the same project name (Projekt.bin),
may be stored on the SD memory card at any given time. The saved file will
always contain the latest project status.
The SD memory card must be formatted to FAT32.
WMS WebControl
2004919_i•en•2017-09-01