Operation Menu - WAREMA WMS WebControl Manual

Iperation
7 Iperation menu
Fig. 22 WMS WebControl interface, "Operation" menu
28
We reserve the right to make technical changes
① Selection of rooms
② Selection of channels and scenes
③ Slider for changing the position of sun shading products
④ Percentage shows the current position of the sun shading product
⑤ Start button sets the sun shading product into motion
⑥ The stop button ends the movement
⑦ Slider for changing the inclination angle of slat products (external
venetian blinds, etc.)
⑧ The degrees value shows the new setpoint inclination of the sun
shading product
⑨ Switch the control modes on/off
⑩ Control mode symbols are displayed when the control
modes are switched on
WMS WebControl
2004919_i•en•2017-09-01