Table of Contents
Advertisement
Commissioning
4 Commissioning
4.1 Commissioning via the
WMS studio software
4.2 Commissioning using
the browser
10
We reserve the right to make technical changes
A comfortable method of loading new projects to the WMS WebControl is
made available by the WMS studio software as of version 2.0.0 (see the
"WMS studio software" software manual, art. no. 890396). You will require an
SD card with the format FAT32.
If you have an existing WMS network, commission the WMS WebControl by
following these 4 steps:
1.
Add the WMS WebControl to the WMS network.
Start the WMS WebControl in your browser.
The WMS WebControl interface appears.
2.
Enter the password and set the time.
In the "Configuration" menu item,
create rooms, followed by channels and scenes.
Assign the WMS channels in the "Configura-
3.
tion" menu item.
4.
Connect the WMS WebControl with the app.
You have successfully commissioned the unit.
WMS WebControl
2004919_i•en•2017-09-01
See Chapter
4.3
See Chapter
4.4
See Chapter
5.5
See Chapter
11
Advertisement
Table of Contents
Need help?
Do you have a question about the WMS WebControl and is the answer not in the manual?
Questions and answers