Chargeguard Ex With Orange And Yellow Wires; Chargeguard Ex Wire Detail - ClipperCreek HCS Series User Manual

Figure 3: ChargeGuard EX with Orange and Yellow Wires
Yellow Wire
Figure 4: ChargeGuard EX Wire Detail
Please refer to these instructions to operate the ChargeGuard EX
enabled HCS EVSE:
1. Connect the HCS EVSE to the vehicle with the SAE
J1772 connector.
2. Enable charging by using access control.
3. The "CHARGING" LED light will illuminate green on
the front panel, indicating the vehicle is now being
charged.
HCS Optional Features User Manual
Yellow Wire
Orange Wire
13
Orange Wire