Serial Ports - Siemens RUGGEDCOM RS416 Installation Manual

1
1
2
Figure 4.3
1
1
2
Figure 4.5
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications (Page
4.3

Serial Ports

The RUGGEDCOM RS416 supports serial cards with fiber serial ST (Straight Tip)
connectors, RS232/RS485/RS422 DB9 serial ports or RS232/RS485/RS422 RJ45 serial
ports.
Serial DB9 and RJ45 ports can be run in RS232, RS485 or RS422 mode. They can also
be ordered with IRIG-B time code support.
Note
On power-up, all serial RJ45 ports default to RS485 mode. Each port can be
individually set to RS232, RS485 or RS422 mode through RUGGEDCOM RS416 . For
more information, refer to the RUGGEDCOM RS416 User Guide for the RUGGEDCOM
RS416.
Note
For information about how to connect devices configured to run in RS485 mode,
refer to
All serial ports feature an LED that indicates the current state of the port.
Green
Off
For specifications on serial ports, refer to
RUGGEDCOM RS416
Installation Manual, 11/2020, C79000-G8976-1018-09
2
Tx Connector
Rx Connector
MTRJ Port
Tx Connector
Rx Connector
SC Port
"Connecting Multiple RS485 Devices (Page
State
1
Tx Connector
1
Rx Connector
2
Figure 4.4
2
1
Tx Connector
1
Rx Connector
2
Figure 4.6
32)".
29)".
Link activity detected
No link detected
"Serial Port Specifications (Page
Communication Ports
4.3 Serial Ports
2
LC Port
2
ST Port
"Fiber Optic
Description
33)".
25