Practical Safety Information - Siemens 7XV5655-0BA00 Application Instructions

Serial hub, ethernet hub for transmission of serial data or protocols from devices with an rs232/rs485/fo interface via ethernet
Hide thumbs Also See for 7XV5655-0BA00:
Table of Contents

Advertisement

English

Practical Safety Information

As is the case for all electrical equipment, there are some basic safety precautions to be
taken. These safety precautions are primarily for your own safety but also prevent damage
to the device.
Settings not described in the manual and changes to the device electronics must only be
carried out by an authorised vendor.
Read the device manual carefully and keep it close at hand.
Make sure that ...
The device is always connected to protective earth
The device is never placed near a heater or the air outlet of an air-conditioning unit.
The device is never exposed to direct sunlight.
The device never comes into direct contact with liquids of any kind. Never use liquids
in the vicinity of the device.
Opening the housing can lead to electric shock and other damage. Never make any
changes to the device that are not described in this manual. Doing so could damage
the device and you would have to pay for the repairs.
Make sure that ...
The mains supply values are the same those stated on the power supply unit. If in
doubt, contact your supplier.
The mains is protected against surges and other disturbances.
The maximum power rating of the connected cables is not be exceeded and
conductors have the required minimum cross-section.
All connected cables are protected against damage.
A damaged mains cable is replaced immediately.
The line-side fuse is removed before cleaning the device to ensure complete
disconnection from the power source and precautions are taken that prevent
unintentional reconnection.
19 / 53
7XV5655-0BA00
C53000-G1176-C174-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7xv5655-0ba00/bbBf040204w003

Table of Contents