Siemens 7XV5655-0BA00 Application Instructions page 28

English
Device Type
Version
Info
In Use
Ping OK
in local Net
Password
Logged in
CPU-ID
General Settings
A unique IP address must first be assigned to each device.
When the Serial Hub is delivered, no valid IP address has been set yet (default: 10.10.5.1).
If the Serial Hub is integrated into a DHCP network, i.e. the available IP addresses are
assigned automatically, the network administrator on the DHCP server must reserve a
fixed IP address for the Serial Hub.
Right-clicking the device entry in the overview window displays a dialog box in which
further actions can be performed.
28 / 53
Device Type
Current firmware version
Currently configured COM port (not available for Serial Hubs)
If this entry is "true", the device is in connection mode and it is
not possible to make changes to parameterisation.
If this entry is "False", the device will no longer be found. It is
not connected, deactivated, or is behind a router that is
blocking the UDP port 3497.
If this entry is "False", the device is not in the local network
segment.
If the device is installed behind a router, the IP address cannot
be changed. This prevents the device from being accessed
unintentionally.
If this entry is "True", the device is password-protected and the
password must be entered before configuration (by right-
clicking "login").
If the password is forgotten, the device must be submitted
again (see last page).
If this entry is "False", the password has to be entered before
configuration (by right-clicking "login").
Internal device ID (not relevant for users)
7XV5655-0BA00
C53000-G1176-C174-3