Gastroback Design Espresso Advanced Pro GS Operating Instructions Manual page 66

5. When the desired amount of espresso has poured into the cup, press the
to stop the pour. The machine will beep twice, indicating it has saved your preferred
pour quantity and exited programming mode.
6. The -button will now pour the saved shot size when pressed, unless reprogrammed,
reset to the default settings, or overridden by the manual function.
PROGRAMMING DOUBLE ESPRESSO
Programming over-rides the preset shot sizes (1oz or 2oz), re-programming the button to
pour your preferred shot size.
1. Prepare to make a two cup of espresso by following step 3.
2. Place your cup underneath the group head.
3. To begin programming, press the PROGRAM-button once. The machine will beep
once and the program button will begin to flash. This indicates the machine is in
programming mode.
4. Press the
the -button surround will begin to flash.
RESETTING DEFAULT VOLUMES
To reset the machine to the default one and two shot pour quantities, press and hold the
PROGRAM-button until the machine beeps three times. Release button. This indicates the
machine has returned to its original default settings.
MANUAL FUNCTION
The Manual function over-rides the preset shot size for one time only. It does not save
the shot size like in programming mode. Press and hold the
Release the button once sufficient espresso has flowed into the cup.
66
-button once. The machine will commence normal pour function, and
5. When the desired amount of espresso
has poured into the cup, press the
-button to stop the pour. The machine
will beep twice, indicating it has saved
your preferred pour quantity and exited
programming mode.
6. The -button will now pour the
saved shot size when pressed, (unless
reprogrammed, reset to the default set-
tings), or overridden by the manual func-
tion.
-button
-button or -button.