Table of Contents
Advertisement
Preparation for Use
Installation
Included Accessories
Hardware Installation
WFM 1125 Option 0A/0B/0C/0D Service Manual
This subsection presents information you need to set up your WFM 1125 Digital
Television Waveform Monitor Option 0A/0B/0C/0D. This subsection contains
the following information:
H Installation.
H Operating Environment.
H Applying and Interrupting Power.
H Repacking.
This section provides instructions for installing the waveform monitor into a
standard rack or one of the optional cases. At installation time, save the shipping
carton and packing materials (including the anti-static bag) in case you need to
ship the instrument.
The waveform monitor is shipped with several accessory items which may be
required for normal use. For more information on accessories, refer to page 7–1.
Because operating environments vary, the waveform monitor is not shipped with
a cabinet unless you have ordered one. All qualification testing for the waveform
monitor was performed in a 1700F00 cabinet. To guarantee compliance with
specifications, you should operate the waveform monitor in one of the cabinets
described here.
Cabinet Options. The cabinets offered for the waveform monitor provide EMI
shielding, protect against electrical shock, and protect against the accumulation
of dust. Figure 2–1 shows the plain cabinet, option 1700F00. A rear panel fan
supplies filtered, cooling air which exits through the cabinet vent holes.
Restricting the air flow through the vents or the rear fan can lead to an excessive
internal temperature.
2-3
Advertisement
Table of Contents
