Table of Contents
Advertisement
Firmware Updates
6-12
Table 6-5: Floppy disk's file list (Cont.)
Type / File name
GF9101 coefficient files
FL_*_LI.TXT
FL_*_HM.TXT
FL_*_RE.TXT
LP_*_LI.TXT
LP_*_HM.TXT
LP_*_RE.TXT
ULP_Y_RE.TXT
063-3250-XX
Codes
APPLI.HEX
Utilities
LOAD0D.EXE
8K config files
ADDER.TTF
10K30 config files
TRANCE.TTF
TRANCE9.TTF
CCIR.TTF
Descriptions
A20U260, A20U270, and A20U280 digital filter
coefficients.
For every mode, there are two types of files available:
files for Y and those for Pb/Pr.
Examples: FLY_Y_RE.TXT FL_C_RE.TXT
Note that, if MENU -> WFM/VECT -> wfm as -> RGB or
GBR has been selected, files for Y are used for the three
GF9101's.
MENU -> Interpo -> ON
MENU -> Filter -> Flat
Non-field mode in Line Select mode
When HMag is displayed in response to the pressing of
the Horizontal Mag button (except in the Line Select
mode)
Other than above
MENU -> Interpo -> ON
MENU -> Filter -> LPF.
Non-field mode in Line Select mode
When HMag is displayed in response to the pressing of
the Horizontal Mag button (except in the Line Select
mode)
Other than above.
For Diamond display.
68K code
PC software for Option 0D
Used to configure A20U600 (i.e., to program FPGA).
Resident
Used to configure A20U200 and A10U200
(i.e., to program FPGA).
When color = SMPTE 240M and resol/d rng = RESOLU
TION
When color = SMPTE 240M and resol/d rng = D RANGE
When color = SMPTE 274M and resol/d rng = RESOLU
TION
WFM 1125 Option 0A/0B/0C/0D Service Manual
Advertisement
Table of Contents
