Bosch Professional GLM 50 C Original Instructions Manual page 22

22 | English
Changing the unit of measurement
The default unit of measurement is "m" (metres).
Switch on the measuring tool.
To enter the "Basic settings" menu, press and hold the [Func] button (7). Select "m/
cm" (for 3 601 K72 C40 and 3 601 K72 C80) or "ft/m" for (3 601 K72 C00).
Press the (3) [+] button or the (8) [–] button to change the unit of measure.
To exit the menu item, press the on/off button (5) [ ]. The selected setting remains
saved after you switch off the measuring tool.
Bluetooth® interface
Transmitting data to other devices
The measuring tool is fitted with a Bluetooth® module which enables wireless data trans-
fer to certain mobile devices with a Bluetooth® interface (e.g. smartphone, tablet).
Information about the system requirements for a Bluetooth® connection can be found on
the Bosch website at www.bosch‑pt.com
For more information, visit the Bosch product page, see QR code, page 8.
u
When transmitting data by means of Bluetooth®, time lags may occur between the mobile
device and the measuring tool. This can be due to the distance between the two devices
or the measurement object itself.
Activating the Bluetooth ® interface for transmitting data to a mobile device
To activate the Bluetooth® interface, press the Bluetooth® button (6) on the measuring
tool. To activate the Bluetooth® signal, press the Bluetooth® button (6) or the (3) [+]
button once again. Ensure that the Bluetooth® interface is activated on your mobile
device.
To expand the functionality of the mobile device and to simplify data processing, special
Bosch applications (apps) are available. These can be downloaded in the respective
stores, depending on the device.
The connection between the mobile device and the measuring tool is established after
the Bosch application has started. If multiple active measuring tools are found, select the
appropriate measuring tool using the serial number. You can find the serial number (11)
on your measuring tool's type plate.
The connection status and the active connection (a) connection are displayed in the
status bar (h) of the measuring tool.
1 609 92A 5E3 | (30.03.2020) Bosch Power Tools