Do not use the laser viewing glasses as safety goggles. The laser viewing glass- es are used for improved visualisation of the laser beam, but they do not protect against laser radiation. Bosch Power Tools 1 609 92A 3UB | (15.3.17)
Avoid operation in direct vicinity of the body over longer periods. ® word mark and logos are registered trademarks owned by Blue- tooth SIG, Inc. and any use of such marks by Robert Bosch Power Tools GmbH is under licence.
English | 11 Digital Laser Measure GLM 50 C GLM 50 C GLM 5000 C Measuring accuracy (typical) ±1.5 mm ±1.5 mm ±1.5 mm Measuring accuracy (typical un- der unfavourable conditions) ±3.0 mm ±3.0 mm ±3.0 mm Lowest indication unit 0.1 mm...
12 | English Digital Laser Measure GLM 50 C GLM 50 C GLM 5000 C Dimensions 106 x 45 x 106 x 45 x 106 x 45 x 24 mm 24 mm 24 mm Degree of protection IP 54 (dust and...
Bluetooth® activated, no connection established Bluetooth® activated, connection established b Measurement reference level c Battery indicator d Measured-value lines e Result line f Measuring functions g Display tilt angle h Status bar i Basic configurations Bosch Power Tools 1 609 92A 3UB | (15.3.17)
Avoid heavy impact to or falling down of the measuring tool. After severe exte- rior effects to the measuring tool, it is recommended to carry out an accuracy check (see “Accuracy Check of the Distance Measurement”, page 24) each time before continuing to work. 1 609 92A 3UB | (15.3.17) Bosch Power Tools...
– the rear measuring-tool edge (e.g. when measuring onward from a wall), – the front measuring-tool edge (e.g. when measuring onward from a table edge), – the centre of thread 13 (e.g. for tripod measurements). Bosch Power Tools 1 609 92A 3UB | (15.3.17)
Select the continuous measurement To switch on the laser beam, briefly press the measuring button 2 [ Move the measuring tool until the required distance value is indicated in the bottom of the display. 1 609 92A 3UB | (15.3.17) Bosch Power Tools...
This measuring procedure can only be used in ver- tical direction. Any deviation in horizontal direction leads to measuring errors. Bosch Power Tools 1 609 92A 3UB | (15.3.17)
Pay attention that the measuring tool is positioned at the same height as the sought measuring point. Now, tilt the measuring tool around the reference plane and meas- ure distance “1” as for a length measurement. 1 609 92A 3UB | (15.3.17) Bosch Power Tools...
3 [+] or button 8 [–]. Begin the stake out function by pressing the measuring button 2 [ ] and slowly move away from the starting point. Bosch Power Tools 1 609 92A 3UB | (15.3.17)
7.620 m 8.890 m Press button 3 [+] to browse forwards through the saved values. 430.16 m Press button 8 [–] to browse backwards through the saved values. 1 609 92A 3UB | (15.3.17) Bosch Power Tools...
Briefly pressing the On/Off button 5 [ ] will delete the last measured value in all measuring functions. Repeated brief pressing of the On/Off button 5 [ ] will delete the measured values in reverse order. Bosch Power Tools 1 609 92A 3UB | (15.3.17)
Bosch website at www.bosch-pt.com For more information, visit the Bosch product page, see QR code, page 8. For data transmission via Bluetooth®, time delays between mobile terminal/device and measuring tool may occur. This can be possible due to the distance between both devices or the object being measured.
8 [–] or switch off the measuring tool. Working Advice For more information, visit the Bosch product page, see QR code, page 8. The measuring tool is equipped with a radio interface. Local operating restric- tions, e.g. in airplanes or hospitals, are to be observed.
If a defect is detected, the display will indicate only the symbol shown opposite and the measuring tool switches itself off. In this case, have the measuring tool checked by an after-sales service agent for Bosch power tools. 1 609 92A 3UB | (15.3.17) Bosch Power Tools...
Exploded views and information on spare parts can also be found under: www.bosch-pt.com Bosch’s application service team will gladly answer questions concerning our prod- ucts and their accessories. In all correspondence and spare parts orders, please always include the 10-digit arti- cle number given on the nameplate of the product.
26 | English HK and Macau Special Administrative Regions Robert Bosch Co. Ltd. 21st Floor, 625 King’s Road North Point, Hong Kong Customer Service Hotline: +852 2101 0235 Fax: +852 2590 9762 E-Mail: firstname.lastname@example.org www.bosch-pt.com.hk Indonesia PT Robert Bosch Palma Tower 10 Floor Jl.
No. 287, 11 Floor Silom Road, Bangrak Bangkok 10500 Tel.: 02 6393111 Fax: 02 2384783 Robert Bosch Ltd., P. O. Box 2054 Bangkok 10501, Thailand www.bosch.co.th Bosch Service – Training Centre La Salle Tower Ground Floor Unit No.2 10/11 La Salle Moo 16...
Tel.: 6746 9770/71 Fax: 6746 9760 E-Mail: email@example.com Toll-Free: 1800 3338333 www.bosch-pt.com.sg Vietnam Robert Bosch Vietnam Co. Ltd 13th Floor , 194 Golden Building 473 Dien Bien Phu Street Ward 25, Binh Thanh District 84 Ho Chi Minh City Vietnam Tel.: (08) 6258 3690...
35 Roper Street, New Centre Johannesburg Tel.: (011) 4939375 Fax: (011) 4930126 E-Mail: firstname.lastname@example.org KZN – BSC Service Centre Unit E, Almar Centre 143 Crompton Street Pinetown Tel.: (031) 7012120 Fax: (031) 7012446 E-Mail: email@example.com Bosch Power Tools 1 609 92A 3UB | (15.3.17)