™
PROFET
+2 12V Arduino Shield
2 Board description
2.3
Pin assignment
™
To use the PROFET
+2 Arduino Shield the necessary control signals can be applied directly at the connectors.
There is no need to use a microcontroller compatible with Arduino or XMC
Arduino Shield into an application. The control pins are logic level inputs which can be driven by any other
microcontroller or with logic level signals. Besides the supply voltage V
connector. The
Figure 6
below shows the pin-out and the connectors of the PROFET
User Manual
™
1100 Boot Kit to get the PROFET
has to be provided to the V
bat
9
™
bat
™
+2 Arduino Shield.
Rev. 1.00
2019-10-23
+2