Table of Contents
Advertisement
English
Operation overview
The decoder LD-G-9 is designed for operation in DCC format and can be
adjusted to one of 127 basic addresses or to one of 10.239 extended
addresses. It is designed to be controlled from digital control units that
are set on the 14-, 28- or the 128-speed mode.
The decoder can be programmed individually by setting the
configuration variables. It is possible to set all configuration variables
with central units which support the CV-programming. With central
units which only support the so-called register-programming the
number of the configuration variables that can be set is restricted.
The configuration variables of the LD-G-9
The following configuration variables (CVs) can be set from the digital
control unit:
§
Basic address (CV#1)
§
Starting voltage (CV#2)
§
Acceleration rate (CV#3)
§
Braking rate (CV#4)
§
Maximum voltage (CV#5) *
§
Version (CV#7) – read only*
§
Manufacturer identification (CV#8) - read only *
§
PWM-Period (CV#9)
§
Extended address (CV#17 und CV#18) *
§
Configuration data 1 (CV#29)
§
Assignment of the outputs X4 to X8 to the function keys F5 to F8
(CV#39 to 43) *
§
Configuration data 2 (CV#49) *
§
Dimming of the outputs X4 to X8 (CV#50 to 54) *
§
Assignment of the outputs X4 to X8 to the function keys F0 to F4
(CV#55 to 59) *
§
Effects for the outputs X4 to X8 (CV#60 to 64) *
Page 30
1
1
1
1
1
1
LD-G-9
1
1
1
Advertisement
Table of Contents
