tams elektronik LD-G-9 Manual page 10

English
Shunting gear
In the speed modes 14 and 28, it is possible to switch into the shunting
gear mode via a function key, when so programmed. In the shunting
gear mode, the velocity of all speed levels is reduced to approx. 50 %
compared to the set velocity.
Acceleration and brake delay
It is possible to program the acceleration and brake delay individually
via the central unit.
Emergency stop
By setting a CV-variable it is possible to adjust how an emergency stop
is carried out. There are the following possibilities:
§
no emergency stop possible,
§
emergency stop at change of direction and / or
§
emergency stop by operating of F1.
Function outputs
The decoder has eight function outputs which can be switched on and
off via the function F0 to F8. They are available to connect optional
accessories (e.g. lighting, smoke generator, sound module, electric
coupling).
You can assign the function keys to the function outputs freely. It is
possible to assign several function keys to one function output.
Effects of the function outputs
It is possible to set the following effects for all function outputs
individually:
§
Irregular flickering. Example of use: Flickering of the boiler fire by
steam engines.
§
Strobe (flashing). Example of use: American locomotives with that
kind of lighting.
§
MARS light (swelling of the brightness). Example of use: American
locomotives with that kind of lighting.
Page 32
LD-G-9