Technical Specifications; Checking The Package Contents - tams elektronik LD-G-9 Manual

LD-G-9
§
Switching on and off depending on the direction of travel.
§
Flashing with a frequency of 2 Hz with two phases which are out-
of-phase by 180 degrees. Example of use: individual flash lights or
alternating flash lights.
§
Flashing with a frequency of 1 Hz.

Technical specifications

Data format
Supply voltage
Current consumption
(without connected loads)
Max. current for motor
Max. current per function output
Max. total current
Protected to
Ambient temperature in use
Ambient temperature in storage
Comparative humidity allowed
Dimensions
Weight

Checking the package contents

Check the contents of the package for completeness immediately after
unpacking:
§
one decoder, with or without soldered connecting wires resp.
soldered NEM 652 interface connector, depending on the version.
§
one manual.
N.B. For technical reasons it is possible that the PCB is not completely
inserted. This is not a fault.
DCC
12-24 Volt digital voltage
approx. 10 mA
1.000 mA
7 outputs with 500 mA each
1 output with 20 mA
1.500 mA
IP 00
0 - + 60° C
-10 - + 80° C
max. 85 %
approx. 16,8 x 24 x 4,5 mm
approx. 2 g
English
Page 33