Technical Specifications; Checking The Package Contents; Required Tools And Materials - tams elektronik LD-G-8 Manual

English

Technical specifications

Data format
Supply voltage
Current consumption
(without connected loads)
Max. current for motor
Max. current per function output
Max. total current
Protected to
Ambient temperature in use
Ambient temperature in storage
Comparative humidity allowed
Dimensions
Weight

Checking the package contents

Check the contents of the package for completeness immediately after
unpacking:
§
one decoder, with or without soldered connecting wires resp.
soldered NEM 652 interface connector, depending on the version.
§
one manual.
N.B. For technical reasons it is possible that the PCB is not completely
inserted. This is not a fault.

Required tools and materials

Make sure you have the following tools, equipment and materials ready
for use:
§
an electronic soldering iron (max. 30 Watt) with a fine tip,
§
a soldering iron stand,
Page 34
DCC
12-24 Volt digital voltage
approx. 10 mA
1.000 mA
500 mA
1.500 mA
IP 00
0 - + 60° C
-10 - + 80° C
max. 85 %
approx. 27,5 x 16,5 x 5,5 mm
approx. 5 g
LD-G-8