How To Use The Appliance - Argo MILO PLUS Operating Instructions Manual

7. The outlet must be between 40 cm and 130 cm above the ground. Avoid tight curves or bends in the flexiblehose.
8. If the air conditioner is not used for prolonged periods, disconnect the pipe and plug the window unit.
Connect the power cord to a suitable electric socket (220–240 V). Insert the supplied batteries into the remote control and
make sure the poles match. Select the desiredoperating mode from the remote control.
This appliance can be used for cooling, dehumidifying and ventilating.
When switching between modes, the fan continues to rotate but the compressor stops: the compressor will start after 3
minutes. This delay protects the compressor from potential damage.
V 06/20
secure it with the hook (B).
The upward-facing side of the flat fitting is marked "TOP".

HOW TO USE THE APPLIANCE

41